XX930A3A2M12
Ultrasonic sensors XX, ultrasonic sensor cylindrical M30, Sn 8 m, M12 connector
End of commercialisation End of commercialization date : End of service date :
XX930A3A2M12 is replaced by the following product:
Quantity : 1
Expand all
Datasheet
Range of product
Telemecanique Ultrasonic sensors XX
Sensor type
Ultrasonic sensor
Series name
General purpose
Sensor name
XX9
Sensor design
Cylindrical M30
Detection system
Diffuse
Material
Plastic
Type of output signal
Analogue
Wiring technique
4-wire
Analogue output function
4...20 mA
[Us] rated supply voltage
15...24 V DC with reverse polarity protection
Electrical connection
Male connector M12 4 pins
Enclosure material
ULTEM
Front material
Epoxy
Thread type
M30 x 1.5
Function available
Without synchronisation mode
Minimum size of detected object
Cylinder diameter 50.68 mm at 4.732 m
Delay first up
1200 MILLISECOND
Current consumption
< 60 mA
Status LED
Setting-up assistance: 1 LED (dual colour), supply on: 1 LED (green), output state: 1 LED (yellow)
Maximum switching capacity
10...500 Ohm overload and short-circuit protection
Setting-up
Slope selection using teach button
Delay response
250 MILLISECOND
Delay recovery
250 MILLISECOND
IP degree of protection
IP67 conforming to IEC 60529
Marking
CE
Standards
IEC 60947-5-2
Product certifications
CCSAus
UL
UL
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 (f = 10-55 Hz)
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
5.5 CENTIMETER
Package 1 width
7.1 CENTIMETER
Package 1 length
14.2 CENTIMETER
Package 1 weight
191 GRAM
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Expand all
Technical Drawings
Dimensions
Minimum Mounting Distances
Side by side
- e : respect the distances indicated on the detection curves
Minimum Mounting Distances
Face to face
- e : respect the distances indicated on the detection curves
- e > 4 x Sn
Wiring Diagram
4-Wire Type
- (1) (+)
- (2) Return signal or teach
- (3) (-)
- (4) Output signal
4-Wire Type
- (1) (+)
- (2) Return signal or teach
- (3) (-)
- (4) Output signal
- BN Brown
- WH White
- BU Blue
- BK Black
Curves
- (1) Parallel movement
- (2) Distance
- (3) Blind zone for diffuse sensors.
Expand all
Documents & Downloads
Document name
Date
Size
2024-02-07
18921683
Document name
Date
Size
2025-01-13
8843040
Document name
Date
Size
4/7/2005
10091
4/7/2005
11399
4/7/2005
13561
4/7/2005
2297
4/7/2005
23237
4/7/2005
2834
4/7/2005
29032
4/7/2005
5608
4/7/2005
5938
4/7/2005
9834
7/18/2024
106621
7/18/2024
12561
7/18/2024
14568
7/18/2024
18868
7/18/2024
19643
7/18/2024
20591
7/18/2024
20695
7/18/2024
20729
7/18/2024
20760
7/18/2024
20888
7/18/2024
21358
7/18/2024
21370
7/18/2024
21755
7/18/2024
23282
7/18/2024
29661
Expand all
Related products & accessories
XSZB130
Inductive proximity sensors XS, accessory for sensor, Ø 30 mm, fixing clamp with indexing, plastic
XUZ2001
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, M12 rod
XUZ2003
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, support for M12 rod
XUZB2030
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, bracket with ball joint, Ø 30 mm
XXZ30
Accessory for XX6, 90° fixing bracket, metallic
XZCC12FCM40B
Female, M12, 4 pin, elbowed connector, cable gland Pg 7
XZCC12FCP40B
Female, M12, 4 pin, elbowed connector, cable gland Pg 7
XZCC12FDM40B
Female, M12, 4 pin, straight connector, cable gland Pg 7
XZCC12FDP40B
Female, M12, 4 pin, straight connector, cable gland Pg 7
XZCP1141L2
Pre wired connectors XZ, straight female, M12, 4 pins, cable PUR 2 m
XZCP1241L2
Pre wired connectors XZ, elbowed female, M12, 4 pins, cable PUR 2 m
Back to top
