XUBLAPCNL2R

光电接收器 XUB,塑料材质,穿透式,激光,感应距离 100 米,12...24 VDC,2 米电缆,PNP型

END OF COMMERCIALISATION End of commercialization date : August 01st 2023 End of service date : August 01st 2023

XUBLAPCNL2R is replaced by the following product:

img

Quantity :  1

Expand all

Datasheet

产品系列
Telemecanique Photoelectric sensors XU
系列号
物料搬运应用
传感器名称
XUB
电子传感器类型
光电传感器接收器
传感器外形
圆柱形 M18
应用领域
不适用
ETIM classification
ETIM 9 - EC002716 - Through beam photoelectric sensor
材料
塑料
透镜材料
PMMA
机柜材料
PBT
[Sn] 额定检测距离
0-100米穿透式光束需要发射器XUBLAKCNL2T
接线技术
3 线制
直径
18 mm
检测系统
对射式
Maximum delay response
0.4 ms
感应范围
> 30 m
电气连接
电缆
电缆长度
2 m
电源电压范围
10-30 V 直流
额定电源电压 [Us]
12...24 V DC,带反极性保护
输入类型
DC
开关能力以 mA
<= 100 mA(过载和短路保护)
最大压降
<1.5 V(闭合状态)
电流消耗
无负载25 mA
发射
红色激光穿透式光束,1级,670 nm,符合IEC 60825-1标准
输出类型
固态
输出信号类型
离散量
固态输出类型
PNP
固态输出功能
1 NO 或 1 NC,可编程
LED状态
1个绿色LED指示电源开启,1个黄色LED指示输出状态,1个红色LED指示稳定性
Maximum delay first up
80 ms
Maximum delay recovery
0.4 ms
宽度
62 mm
净重
0.09 kg
IP 保护等级
符合 IEC 60529 标准的 IP67 双重绝缘
存储环境温度
-40…70 °C
抗冲击
30 gn(持续时间 = 11 毫秒),符合 IEC 60068-2-27 标准
抗振动
7 gn,振幅 = +/- 1.5 mm(频率 = 10-55 Hz),符合 IEC 60068-2-6 标准
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
保修
18 months
包装单位类型1
PCE
数量units in包装1
1
包装1高度
3.6 cm
包装1宽度
7 cm
包装1长度
13 cm
包装1重量
0.09 kg

Expand all

Technical Drawings

Dimensions

epds

Wiring Schemes

PNP

epds
  • (+) BN : Brown
  • (-) BU : Blue
  • (Output) BK : Black

Curves

Detection Curve (Set to Infinity)

epds

Curves

Excess Gain Curve

epds
  • (X) Distance (m)
  • (Y) Gain

Curves

Standard Curve

epds
  • (X) Distance (m)
  • (Y) Gain
  • (X) Distance focusing point (m)
  • (Y) Minimum size of the object to be detected (mm)

Curves

Detection Limit Curve

epds
  • (X) Distance (m)
  • (Y) Gain
  • (X) Distance focusing point (m)
  • (Y) Minimum size of the object to be detected (mm)
  • (X) Distance focusing point (m)
  • (Y) Minimum size of the object to be detected (mm)

Expand all

Documents & Downloads

Document name
Date
Size

Back to top

arrow