XS1M18KPM40D
Inductive proximity sensors XS, inductive sensor XS1 M18, L70mm, brass, Sn5mm, 12...24 VDC, M12
End of commercialisation Fecha de fin de comercialización : Fecha de fin del servicio :
Expandir todo
Ficha de datos
Range of product
Telemecanique Inductive proximity sensors XS
Series name
Application
Sensor type
Inductive proximity sensor
Sensor name
XS1
Device application
Factor 1 (Fe/Nfe)
Sensor design
Cylindrical M18
Size
70 mm
Body type
Fixed
Type of output signal
Discrete
Wiring technique
4-wire
Discrete output function
1 NO or 1 NC programmable
Detector flush mounting acceptance
Flush mountable
Discrete output type
PNP and NPN
Material
Metal
Electrical connection
Male connector M12, 4 pins
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Output circuit type
DC
Switching capacity in mA
<= 200 mA with overload and short-circuit protection
IP degree of protection
IP67 conforming to IEC 60529
Enclosure material
Nickel plated brass
Detection face
Frontal
Thread type
M18 x 1
Front material
PPS
Sensing range
> 4...8 mm
Differential travel
1...15 % of Sr
Repeat accuracy
<= 3% of Sr
Status LED
Output state: 1 LED (yellow)
Switching frequency
<= 1000 Hz
Voltage drop
<2.6 V (closed)
Current consumption
0...15 mA no-load
Delay first up
10 MILLISECOND
Delay response
0.3 MILLISECOND
Marking
CE
Delay recovery
0.7 MILLISECOND
Product certifications
CSA
UL
UL
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
2.6 CENTIMETER
Package 1 width
8 CENTIMETER
Package 1 length
15.6 CENTIMETER
Package 1 weight
66 GRAM
Unit type of package 2
S01
Number of units in package 2
11
Package 2 height
15 CENTIMETER
Package 2 width
15 CENTIMETER
Package 2 length
40 CENTIMETER
Package 2 weight
1.043 KILOGRAM
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Expandir todo
Dibujos tecnicos
Dimensions
Minimum Mounting Distances
Wiring Schemes
Performance Curves
Standard Steel Target : 18x18x1 mm
Expandir todo
Documentos y Descargas
Nombre del documento
Fecha
Tamaño
11/26/2007
15441
11/26/2007
1624
11/26/2007
26414
11/26/2007
3326
Nombre del documento
Fecha
Tamaño
1999-07-01
1422189
Expandir todo
Productos y accesorios relacionados
XSZB118
Inductive proximity sensors XS, accessory for sensor, Ø 18 mm, fixing clamp, plastic, with indexing
XUZA118
90° fixing bracket, Photoelectric sensors XU, accessory for sensor, Ø 18 mm, stainless steel
XZCP1141L5
Pre wired connectors XZ, straight female, M12, 4 pins, cable PUR 5 m
XZCP1241L5
Pre wired connectors XZ, elbowed female, M12, 4 pins, cable PUR 5 m
Back to top
