XUSLDMY5A1560
Safety light curtain type 4 - XUSLDM - for hand protection - 1560 mm
End of commercialisation Ticarileşme tarihi sonu : Servis tarihi sonu :
Tümünü genişlet
Veri sayfası
Range of product
Telemecanique Safety light curtains XUSL
Product or component type
Safety light curtain type 4
Series name
Advanced
Device short name
XUSLDM
Product specific application
For hand protection
Output type
1 auxiliary output solid-state PNP/NPN, 2 safety outputs OSSD solid-state PNP (NO) (short-circuit protection)
Detection system
Transmitter-receiver system
Response time
32 ms normal, 53 ms slow
Kit composition
1 user guide with certificate of conformity on CD-ROM, 2 sets of 2 brackets with fixings, arc suppressor set(s), receiver(s), test rod(s), transmitter(s)
Light source
GaAIAs LED, 880 nm
[Us] rated supply voltage
24 V DC +/- 20 %
Current consumption
450 mA no-load receiver, 1.8 A with maximum load receiver, 285 mA transmitter
Output voltage
24 V
Output circuit type
DC
Electrical connection
1 female connector M12 5 pins transmitter, 1 female connector M12 8 pins receiver
Local signalling
1 LED transmitter power supply, 4 LEDs receiver stop, run, interlock, ECS/B Blanking or FB (Floating Blanking)
Marking
CE
Material
Aluminium: casing, 20 % fibre glass impregnated nylon: end caps
Function available
Alignment aid by display of each light beam broken accessible by cabling alone, automatic start accessible by cabling alone, automatic/manual, manual first cycle accessible via programming and diagnostic module, auxiliary output (alarm or status signalling, PNP or NPN) accessible via programming and diagnostic module, auxiliary output (PNP, status signalling) accessible by cabling alone, blanking (ECS/B) accessible via programming and diagnostic module, cascadable versions with up to 4 segments total, using segments XUS LDS accessible via programming and diagnostic module, display of operating modes and faults by LED and/or PDM accessible via programming and diagnostic module, floating blanking (FB) accessible via programming and diagnostic module, LED display of operating modes and faults accessible by cabling alone, light beam coding (A or B) accessible via programming and diagnostic module, monitored blanking accessible via programming and diagnostic module, monitoring of external switching devices (EDM: External Device Monitoring) accessible via programming and diagnostic module, muting accessible via programming and diagnostic module, programming+downloading of conf settings, via programming+diagnostic module(PDM) accessible via programming and diagnostic module, reduction of resolution accessible via programming and diagnostic module, response time (normal, slow) accessible via programming and diagnostic module, sensing distance (short, long) accessible via programming and diagnostic module, start button (NO or NC, 0 V or 24 V) accessible via programming and diagnostic module, test (MTS: Monitoring Test Signal) accessible by cabling alone
Fixing mode
End brackets
Standards
ANSI B11:19-1990
ANSI/RIA R15.06
EMC 2004/108/EC
EN/IEC 61496-1
EN/IEC 61496-1-2 for type 4 ESPE
EN/IEC 61496-2
machinery directive 2006/42/EC
OSHA 1910-212
OSHA 1910-217C
work equipment directive 2009/104/EC
ANSI/RIA R15.06
EMC 2004/108/EC
EN/IEC 61496-1
EN/IEC 61496-1-2 for type 4 ESPE
EN/IEC 61496-2
machinery directive 2006/42/EC
OSHA 1910-212
OSHA 1910-217C
work equipment directive 2009/104/EC
Product certifications
CSA
TÜV
UL
TÜV
UL
Safety level
Can reach SIL 3 correctly wired conforming to IEC 61508, can reach category 4 correctly wired conforming to EN/ISO 13849-1, can reach PL = e correctly wired conforming to EN/ISO 13849-1, type 4 conforming to IEC 61496-1-2
IP degree of protection
IP65
Safety reliability data
PFH = 4.9E-8 1/h conforming to IEC 61508 verified in worst case conf: 256 beams, 2 segments, mute 20 year(s)
Shock resistance
10 gn for 16 ms conforming to IEC 61496-1
Vibration resistance
0.35 +/- 0.05 mm (f= 10-55 Hz) conforming to IEC 61496-1
Unit type of package 1
PCE
Number of units in package 1
1
Back to top
