XCKP2101P16
Limit switch, Limit switches XC Standard, XCKP, with rotary head w/o operating lever, 1NC+1 NO, snap, M16
Commercialized
Expand all
Datasheet
Range of product
Telemecanique Limit switches XC Standard
Series name
Standard format
Product or component type
Limit switch
Device short name
XCKP
Sensor design
Compact
Body type
Fixed
Head type
Rotary head
Material
Plastic
Body material
Plastic
Head material
Zamak
Fixing mode
By the body
Movement of operating head
Rotary
Type of operator
Spring return without operating lever
Type of approach
Lateral approach, 2 directions
Number of poles
2
Contacts type and composition
1 NC + 1 NO
Contact operation
Snap action
Electrical connection
Screw-clamp terminals, clamping capacity: 1 x 0.34...2 x 1.5 mm²
Cable entry
1 entry tapped for M16 x 1.5 cable gland, cable outer diameter: 4…8 mm
Contacts insulation form
Zb
Positive opening
With
Positive opening minimum torque
0.25 N.m
Minimum torque for tripping
0.1 N.m
Maximum actuation speed
1.5 m/s
Repeat accuracy
0.1 mm on the tripping points with 1 million operating cycles
Contact code designation
A300, AC-15 (Ue = 240 V), Ie = 3 A, Ithe = 10 A conforming to IEC 60947-5-1 appendix A
Q300, DC-13 (Ue = 250 V), Ie = 0.27 A conforming to IEC 60947-5-1 appendix A
Q300, DC-13 (Ue = 250 V), Ie = 0.27 A conforming to IEC 60947-5-1 appendix A
[Ui] rated insulation voltage
300 V conforming to UL 508
500 V (pollution degree 3) conforming to IEC 60947-1
300 V conforming to CSA C22.2 No 14
500 V (pollution degree 3) conforming to IEC 60947-1
300 V conforming to CSA C22.2 No 14
Maximum resistance across terminals
25 MOhm conforming to IEC 60255-7 category 3
[Uimp] rated impulse withstand voltage
6 kV conforming to IEC 60664
6 kV conforming to IEC 60947-1
6 kV conforming to IEC 60947-1
Short-circuit protection
10 A cartridge fuse, type gG
Electrical durability
5000000 cycles, DC-13, 120 V, 4 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, 24 V, 10 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, 48 V, 7 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, 24 V, 10 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, 48 V, 7 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
Mechanical durability
10000000 cycles
Width
31 mm
Height
65 mm
Depth
30 mm
Net weight
0.115 kg
Terminals description ISO n°1
(21-22)NC
(13-14)NO
(13-14)NO
Shock resistance
50 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance
25 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
IP degree of protection
IP66 conforming to IEC 60529
IP67 conforming to IEC 60529
IP67 conforming to IEC 60529
IK degree of protection
IK04 conforming to IEC 62262
Electrical shock protection class
Class II conforming to IEC 61140
Class II conforming to NF C 20-030
Class II conforming to NF C 20-030
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…70 °C
Protective treatment
TC
Product certifications
CSA
CCC
UL
CCC
UL
Standards
IEC 60204-1
IEC 60947-5-1
CSA C22.2 No 14
IEC 60204-1
UL 508
IEC 60947-5-1
IEC 60947-5-1
CSA C22.2 No 14
IEC 60204-1
UL 508
IEC 60947-5-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
3.3 cm
Package 1 Width
3.8 cm
Package 1 Length
9.8 cm
Package 1 Weight
106 g
Unit Type of Package 2
S02
Number of Units in Package 2
100
Package 2 Height
15 cm
Package 2 Width
30 cm
Package 2 Length
40 cm
Package 2 Weight
11.055 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Technical Drawings
Dimensions
- (1) Tapped entry for M16 x 1.5
- (2) 2 elongated holes Ø 4.3 x 6.3 mm on 22 mm centres, 2 holes Ø 4.3 on 20 mm centres.
- (3) 2 x Ø 3 holes for support studs, depth 4 mm.
Mounting with Cable Entry
Position of Cable Gland
- (1) Recommended
- (2) To be avoided
Mounting with Rotary Heads and Levers
Type of Cam
- (1) Recommended
- (2) To be avoided
Setting-up with Head ZCE01 and ZCE09
- (1) Tightening torque (Min : 1) (Max : 1.5)
- (2) Tightening torque (Min : 0.8) (Max : 1.2)
Wiring Diagram
2-pole NC + NO Snap Action
Characteristics of Actuation
Switch Actuation on End
Functionnal Diagram
- (1) Closed
- (2) Open
- (4) Tripping
- (5) Resetting
Expand all
Documents & Downloads
Document name
Date
Size
11/23/2023
294.5 kB
11/23/2023
152.5 kB
11/23/2023
294.8 kB
Document name
Date
Size
11/29/2023
61.8 MB
11/23/2023
62.3 MB
Document name
Date
Size
4/26/2024
195.3 kB
4/26/2024
195.3 kB
Expand all
Related products & accessoires
XCMZ07
Spacer for angular positioning of head with adjustable lever, for limit switch
ZCE05
Limit switch head, Limit switches XC Standard, ZCE, without lever spring return left or right actuation
DE9RA1012
Telemecanique Safety switches XCS -1/2' NPT conduit adaptor, for plastic switch XCSPA
ZCY18
Limit switch lever, Limit switches XC Standard, ZCY, thermoplastic roller
ZCY19
Limit switch lever, Limit switches XC Standard, ZCY, steel roller
ZCY12
Limit switch lever, Limit switches XC Standard, ZCY, steel ball bearing mounted roller
ZCY15
Limit switch lever, Limit switches XC Standard, ZCY, thermoplastic roller
ZCY16
Limit switch lever, Limit switches XC Standard, ZCY, steel roller
ZCY17
Limit switch lever, Limit switches XC Standard, ZCY, steel ball bearing mounted roller
ZCY23
Limit switch lever, Limit switches XC Standard, ZCY, steel ball bearing mounted roller
ZCY25
Limit switch lever, Limit switches XC Standard, ZCY, thermoplastic roller
ZCY26
Limit switch lever, Limit switches XC Standard, ZCY, steel roller
ZCY44
Limit switch lever, Limit switches XC Standard, ZCY, thermoplastic pliable roller variable length
ZCY45
Limit switch lever, Limit switches XC Standard, ZCY, thermoplastic roller variable length
ZCY46
Limit switch lever, Limit switches XC Standard, ZCY, steel roller variable length
ZCY48
Limit switch lever, Limit switches XC Standard, ZCY, steel pliable roller variable length
ZCY39
Limit switch lever, Limit switches XC Standard, ZCY, thermoplastic roller Ø 50 mm
ZCY22
Limit switch lever, Limit switches XC Standard, ZCY, ceramic roller
ZCY81
Limit switch lever, Limit switches XC Standard, ZCY, spring with thermoplastic end
ZCY91
Limit switch lever, Limit switches XC Standard, ZCY, spring rod with metal end
ZCY49
Limit switch lever, Limit switches XC Standard, ZCY, thermoplastic roller Ø 50 mm variable length
ZCY69
Limit switch lever, Limit switches XC Standard, ZCY, thermoplastic plastic roller Ø 50 mm var.length adjust. track
ZCY53
Limit switch lever, Limit switches XC Standard, ZCY, steel round rod 3 mm, L = 125 mm
ZCY54
Limit switch lever, Limit switches XC Standard, ZCY, steel square rod 3 mm, L = 125 mm
ZCY55
Limit switch lever, Limit switches XC Standard, ZCY, glass fiber round rod 3 mm L= 125 mm
ZCY59
Limit switch lever, Limit switches XC Standard, ZCY, thermoplastic round rod 6 mm L = 200 mm
Back to top
