Home Products XCSE7542

XCSE7542

Safety switch, Telemecanique Safety switches XCS, metal XCSE, 2NC+1 NO slow break 2entries tapped M20 220/240 V

arrow

Commercialized

green premium
Download pdf datasheet Find a distributor

Expand all

Datasheet

Range of product
Telemecanique Safety switches XCS
Product or component type
Safety switch
Component name
XCSE
Design
Rectangular
Material
Metal
Head type
Key operated turret head
Contacts type and composition
2 NC + 1 NO
Contact operation
Slow-break, break before make
Solenoid contacts type and composition
1 NC + 1 NO (slow-break, simultaneous)
Cable entry
2 entries tapped for M20 x 1.5
Electromagnet interlocking
Locking on energisation and unlocking on de-energisation of solenoid
[Us] rated supply voltage
220/240 V - 20...10 %
Cable outer diameter
7…13 mm
Electrical connection
Terminal, clamping capacity: 1 x 0.5...2 x 1.5 mm² with or without cable end
Number of poles
3
Locking options description
With interlocking, locking by solenoid
Local signalling
2 LEDs (green or orange) for guard open/guard closed and locked
Signalling circuit voltage
110/240 V (voltage limits: 95...264 V)
Positive opening
With NC contact
Supply voltage type
AC/DC
Supply frequency
50/60 Hz
Load factor
1
Power consumption in VA
10 VA inrush
10 VA sealed
Signalling circuit type
AC
Signalling circuit consumption
7 mA
Mechanical durability
1000000 cycles
Minimum actuation speed
0.01 m/s
Maximum actuation speed
0.5 m/s
[Ie] rated operational current
0.55 A at 125 V, DC-13, Q300 conforming to EN/IEC 60947-5-1
0.27 A at 250 V, DC-13, Q300 conforming to EN/IEC 60947-5-1
3 A at 120 V, AC-15, B300 conforming to EN/IEC 60947-5-1
1.5 A at 240 V, AC-15, B300 conforming to EN/IEC 60947-5-1
[Ithe] conventional enclosed thermal current
6 A
[Ui] rated insulation voltage
250 V conforming to EN/IEC 60947-1 for signalling circuit
[Uimp] rated impulse withstand voltage
6 kV conforming to EN/IEC 60947-5-1
Protection type
Overvoltage protection for signalling circuit
Short-circuit protection
10 A cartridge fuse type gG (gl)
Actuator forcible withdrawal rtc
2000 N
Minimum actuator force for extraction
20 N
Maximum operating rate
10 cyc/mn for maximum durability
Safety level
Can reach category 4 with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1
Can reach PL = e with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1
Can reach SIL 3 with the appropriate monitoring system and correctly wired conforming to EN/IEC 61508
Safety reliability data
B10d = 5000000 value given for a life time of 20 years limited by mechanical or contact wear
Body material
Zamak
Head material
Zamak
Depth
44 mm
Height
146 mm
Width
98 mm
Net weight
1.14 kg
Standards
EN/IEC 60947-5-1
EN/ISO 12100
CSA C22.2 No 14
UL 508
EN 1088/ISO 14119
EN/IEC 60204-1
Product certifications
UL
CSA
Protective treatment
TC
Ambient air temperature for operation
-25…40 °C
Ambient air temperature for storage
-40…70 °C
Vibration resistance
5 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
Shock resistance
10 gn for 11 ms conforming to IEC 60068-2-27
Electrical shock protection class
Class I conforming to EN/IEC 61140
IP degree of protection
IP67 conforming to EN/IEC 60529 and EN/IEC 60947-5-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
5.5 cm
Package 1 Width
11.0 cm
Package 1 Length
15.0 cm
Package 1 Weight
1.285 kg
Sustainable offer status
Green Premium product
REACh Regulation
REACh Declaration
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Yes
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months

Back to top

arrow