XGCS49LB201

Panel mounting smart antenna with lights, Radio frequency identification XG, pilot

arrow

Commercialized

Expand all

Datasheet

Range of product
Telemecanique Radio frequency identification XG
Product or component type
Panel mounting smart antenna with lights
RFID compact station name
XGCS
RFID frequency
13.56 MHz
Design
Diameter 22 mounting
Electrical connection
5 pin(s)1 male connector M12
Transmission rate
9600 bauds...115200 bauds (automatic detection)
Outer dimension
40 x 40 x 40 mm
Product compatibility
RFID microchip Texas (Tag-it HFI)
RFID microchip INSIDE (micropass)
RFID microchip Fujitsu (MB89R118 - MB89R119)
RFID microchip NXP (SL2, SL1, Ultralight, Std 1K/4K, Desfire)
RFID microchip STM (CRIX4K)
RFID microchip Microelectronic (EM4135)
[Sn] nominal sensing distance
10…70 mm
[Us] rated supply voltage
24 V DC conforming to Protective Extra Low Voltage
Communication port protocol
Modbus RTU
Communication port support
RS485 non isolated
Associated tag type
Automatic detection of the type of tag
ISO 15693 standard tags
ISO 14443 standard tags
Supply voltage limits
19.2…29 V DC
Current consumption
< 60 mA
Status LED
Communication network: 1 LED (dual colour)
RFID communication: 1 LED (dual colour)
Multi-colour LED: 2 LEDs (multi-colour)
Tightening torque
< 2.2 N.m
Marking
CE
Net weight
0.057 kg
Product certifications
UL, FCC
Standards
ETSI EN 301 489-3
ETSI EN 300 330-2
ETSI EN 300 330-1
ETSI EN 301 489-1
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…85 °C
IP degree of protection
IP69K front face: conforming to IEC 60529
IP65 back: conforming to IEC 60529
Vibration resistance
2 mm (f= 5…29.5 Hz) conforming to IEC 60068-2-6
7 gn (f= 29.5…150 Hz) conforming to IEC 60068-2-6
Shock resistance
30 gn for 11 ms conforming to IEC 60068-2-27
IK degree of protection
IK02 conforming to IEC 62262
Electromagnetic compatibility
Electrostatic discharge immunity test: (contact discharge), 3, 6 kV, conforming to IEC 61000-4-2
Electrostatic discharge immunity test: (air discharge), 3, 8 kV, conforming to IEC 61000-4-2
Electrical fast transient/burst immunity test: (signal ports), 3, 1 kV, conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test: (power ports), 3, 2 kV, conforming to IEC 61000-4-4
Susceptibility to electromagnetic fields: , 3, 10 V/m, conforming to IEC 61000-4-3
1.2/50 µs shock waves immunity test: , 3, 10 kV, conforming to IEC 61000-4-5
Conducted RF disturbances: , 3, 10 V, conforming to IEC 61000-4-6
Magnetic field at power frequency: , 4, 30 A/m, conforming to IEC 61000-4-8
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.400 cm
Package 1 Width
6.400 cm
Package 1 Length
9.000 cm
Package 1 Weight
74.000 g
Unit Type of Package 2
S01
Number of Units in Package 2
22
Package 2 Height
15.000 cm
Package 2 Width
15.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
1.801 kg
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Yes
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Expand all

Technical Drawings

Dimensions

epds
  • (1) Locking nut

Connections

Modbus Connections

epds
Pin no. Modbus smart antenna signal
1 Drain (Modbus-SHLD)
2 + 24 VDC
3 0 V/Modbus-GND
4 D0
5 D1

Connection Examples

Connection to a Terminal

epds
  • (1) Power supply
  • (2) Network Tee
  • (3) Male M12 connector
  • (4) Terminal
  • (5) Smart antenna

Connection Examples

Connection to an Automation Platform

epds
  • (1) Power supply
  • (2) Network Tee
  • (3) Male M12 connector
  • (4) Terminal
  • (5) Smart antenna
  • (1) Power supply
  • (2) Network Tee
  • (3) Male M12 connector
  • (4) Terminal
  • (5) Smart antenna
  • (6) Automation platform

Mounting and Clearance

Minimum Distance Between 2 Identical Smart Antennas According to their Positioning and Type of Tag Used

epds
Tag e1 e2
XGHBPB3345 90 90
XGHB90E340 310 310
XGHB90E341 90 90
Tag e1 e2
XGHBPB3345 3.54 3.54
XGHB90E340 12.20 12.20
XGHB90E341 3.54 3.54

Expand all

Documents & Downloads

Document name
Date
Size

11/23/2023

20.2 MB

Document name
Date
Size

Expand all

Related products & accessoires

img
XGHBPB3345

Electronic tag, Radio frequency identification XG, Key Fob

img
XGHB90E340

Electronic tag, Radio frequency identification XG, RFID 13.56 MHz, ISO badge 54 x 85.5 x 1, 256 Bytes

img
XGHB90E341

Electronic tag, Radio frequency identification XG, RFID 13.56 MHz, ISO badge 54 x 85.5 x 1, 1 KB

img
XGSZCNF01

Configuration badge, Radio frequency identification XG, for of RFID sation addresses

img
ZB5AZ905

Tightening tool for fixing nut, Harmony XB5, plastic, black

Back to top

arrow