XUX0AKSAT16T
Photoelectric sensors XU, XUX, emitter, 12...24 VDC, terminals
Commercialized
Expand all
Datasheet
Range of product
Telemecanique Photoelectric sensors XU
Series name
General purpose multimode
Electronic sensor type
Photo-electric sensor transmitter
Sensor name
XUX
Sensor design
Compact 92 x 71
Detection system
Thru beam
Material
Plastic
Supply circuit type
DC
Wiring technique
3-wire
Electrical connection
Screw-clamp terminals, 1 x 1.5 mm² or 1 x 0.75 mm² with adaptor
Product specific application
-
Emission
Infrared thru beam
[Sn] nominal sensing distance
40 m thru beam need a receiver
Enclosure material
PBT
Lens material
PMMA
Maximum sensing distance
60 m thru beam
Add on input
Test by emission breaking
Cable entry
1 entry for M16 x 1.5 cable gland, cable outer diameter: 7…10 mm
Status LED
1 LED (green) for supply on
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Supply voltage limits
10…36 V DC
Switching capacity in mA
<= 100 mA (overload and short-circuit protection)
Switching frequency
<= 250 Hz
Maximum voltage drop
<1.5 V (closed state)
Current consumption
20 mA no-load
Maximum delay first up
200 ms
Maximum delay response
2 ms
Maximum delay recovery
2 ms
Setting-up
Without sensitivity adjustment
Depth
77 mm
Height
92 mm
Width
31 mm
Net weight
0.2 kg
Product certifications
CSA
CE
UL
CE
UL
Ambient air temperature for operation
-25…55 °C
Ambient air temperature for storage
-40…70 °C
Vibration resistance
7 gn, amplitude = +/- 1.5 mm (f = 10…55 Hz) conforming to IEC 60068-2-6
Shock resistance
30 gn (duration = 11 ms) conforming to IEC 60068-2-27
IP degree of protection
IP65 double insulation conforming to IEC 60529
IP67 double insulation conforming to IEC 60529
IP67 double insulation conforming to IEC 60529
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.200 cm
Package 1 Width
9.500 cm
Package 1 Length
13.000 cm
Package 1 Weight
183.000 g
Unit Type of Package 2
S01
Number of Units in Package 2
11
Package 2 Height
15.000 cm
Package 2 Width
15.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
2.227 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Technical Drawings
Dimensions
- (1) Elongated hole Ø 5.5 x 7
- (2) Elongated hole Ø 5.5 x 9
- (3) Ø 5.5 hole
Wiring Schemes
| M12 | Terminals | |||
|---|---|---|---|---|
| 1 | 1 | + | ||
| 3 | 2 | - | ||
| 2 | 3 | Beam break input (1) |
(1) Input not connected: beam made. Input connected to –: beam broken.
Detection Curves
Expand all
Documents & Downloads
Document name
Date
Size
11/23/2023
1.0 MB
Document name
Date
Size
11/29/2023
33.8 MB
11/29/2023
33.7 MB
11/23/2023
34.2 MB
Document name
Date
Size
3/7/2024
195.3 kB
3/7/2024
195.3 kB
Document name
Date
Size
Expand all
Related products & accessoires
XUZX2003
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, bracket with ball joint, XUX
XUZX2004
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, protective housing with ball joint, XUX
XUZ2001
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, M12 rod
XUZ2003
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, support for M12 rod
XUZX2000
Photoelectric sensors XU, accessory for sensor, XUX, fixing bracket, metal
XUZC50
Photoelectric sensors XU, accessory for sensor, reflector, 50 x 50 mm
Back to top
