XX918A3E2M12
Ultrasonic sensors XX, ultrasonic sensor cylindrical M18 Sn 0.5 m
End of commercialisation End of commercialization date : May 31st 2023 End of service date : May 31st 2023
Expand all
Datasheet
Range of product
Telemecanique Ultrasonic sensors XX
Sensor type
Ultrasonic sensor
Series name
General purpose
Sensor name
XX9
Sensor design
Cylindrical M18
Detection system
Diffuse
Material
Plastic
Type of output signal
Analogue
Wiring technique
4-wire
Analogue output function
4...20 mA
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Electrical connection
Male connector M12 4 pins
Enclosure material
Valox
Front material
Epoxy
Thread type
M18 x 1
Voltage drop
1 VOLT
Minimum size of detected object
Cylinder diameter 1.6 mm
Delay first up
100 MILLISECOND
Current consumption
40 mA
Status LED
Setting-up assistance: 1 LED (dual colour), supply on: 1 LED (green), output state: 1 LED (yellow)
Maximum switching capacity
10...500 Ohm overload and short-circuit protection
Setting-up
Slope selection using teach button
Delay response
25 MILLISECOND
Delay recovery
25 MILLISECOND
IP degree of protection
IP67 conforming to IEC 60529
Marking
CE
Standards
IEC 60947-5-2
Product certifications
CCSAus
UL
UL
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 (f = 10-55 Hz)
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
4 CENTIMETER
Package 1 width
8.5 CENTIMETER
Package 1 length
8.5 CENTIMETER
Package 1 weight
49 GRAM
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Back to top
