XXS30P8VPM12

Ultrasonic sensor, plastic, cylindrical M30, straight, 8 m, 0…10 V+PNP

arrow

Commercialized

Expand all

Datasheet

Range of product
Telemecanique Ultrasonic sensors XX
Sensor type
Ultrasonic sensor
Series name
General purpose
Sensor name
XXS
Sensor design
Cylindrical M30
Detection system
Diffuse
[Sn] nominal sensing distance
8 m adjustable with teach push-button
8 m software with kit
Material
Plastic
Type of output signal
Analogue + discrete
Discrete output function
1 NO or 1 NC programmable
Wiring technique
5-wire
Discrete output type
PNP
Analogue output function
0...10 V
[Us] rated supply voltage
24 V DC with reverse polarity protection
Electrical connection
Male connector M12 5 pins
[Sd] sensing range
0.290…8 m
IP degree of protection
IP65 conforming to IEC 60529
IP67
Enclosure material
PBT
Front material
Epoxy
Rubber
Resin
Thread type
M30 x 1.5
Supply voltage limits
14…30 V DC
Function available
With synchronisation mode
Software configurable
[Sa] assured operating distance
0.290…8 m (teach mode)
Blind zone
290 mm
Transmission frequency
75 kHz
Repeat accuracy
0.1 %
Deviation angle from 90° of object to be detected
-4…12 °
Minimum size of detected object
Cylinder diameter 12 mm at 1.8 m
Status LED
Output state: 1 LED (green/yellow)
Output state: 1 LED (multi-colour)
Echo state: 1 LED (green)
Current consumption
50 mA
Maximum switching current
100 mA with overload and short-circuit protection
Maximum switching capacity
>= 1 kOhm overload and short-circuit protection
Maximum voltage drop
2 V
Switching frequency
<= 2 Hz
Setting-up
Teach mode
Configurator software
Maximum delay first up
600 ms
Maximum delay recovery
500 ms
Marking
CE
CULus
Threaded length
43.2 mm
Height
30 mm
Width
43.2 mm
Depth
116.3 mm
Net weight
0.14 kg
Standards
IEC 60947-5-2
CSA C22.2 No 14
UL 508
Product certifications
cULus
E2
Ecolab
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…85 °C
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 (f = 10…55 Hz)
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Resistance to electrostatic discharge
8 kV conforming to IEC 61000-4-2
Resistance to electromagnetic fields
10 V/m level 3 conforming to IEC 61000-4-3
Resistance to fast transients
2 kV conforming to IEC 61000-4-4
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
7.11 cm
Package 1 Width
9.91 cm
Package 1 Length
13.46 cm
Package 1 Weight
0.19 kg
EU RoHS Directive
Not applicable, out of EU RoHS legal scope
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months

Expand all

Technical Drawings

Dimensions

epds

Connections

Connector Wiring

epds
  • (1) : Synchronization
Pin number Wire color Description
1 BN: Brown + 24VDC
2 WH: White Digital Output
3 BU: Blue 0 VDC
4 BK: Black Analog Output
5 GY: Grey Synchronization

Connections

Wiring Scheme. Analog Output

epds
  • (1) : Synchronization
  • (1) : Synchronization
  • 0-10 V: 1 kΩ…∞

Connections

Wiring for the Synchronization Function (Side by Side Application)

epds
  • (1) : Synchronization
  • (1) : Synchronization
  • 0-10 V: 1 kΩ…∞
  • (1) : Synchronization
  • D1 : 1/8 Sn
  • BN : Brown
  • WH : White
  • BU : Blue
  • BK : Black
  • GY : Grey

NOTE: Up to 8 sensors can be synchronized to operate side by side by electrically connecting all pin no.5 (grey) wires together.

To synchronize more than 8 sensors, a PLC output can be used (the pins no.5 must be simultaneously driven by the rising edge of a pulse).

Performance Curves

Detection Curve with 100 x 100 mm / 3.94 x 3.94 inches Square Target

epds
  • (X) : Target distance
  • (Y) : Detection limit
  • (1) : Blind zone: 290 mm / 11.41 inches
  • (2) : Sn max.
  • (3) : 100 x 100 mm / 3.94 x 3.94 inches stainless steel plate

Performance Curves

Detection Curve with Round Bar

epds
  • (X) : Target distance
  • (Y) : Detection limit
  • (1) : Blind zone: 290 mm / 11.41 inches
  • (2) : Sn max.
  • (3) : 100 x 100 mm / 3.94 x 3.94 inches stainless steel plate
  • (X) : Target distance
  • (Y) : Detection limit
  • (1) : Blind zone: 290 mm / 11.41 inches
  • (2) : Sn max. with Ø 10 mm / 0.394 inches cylinder
  • (3) : Sn max. with Ø 25 mm / 0.984 inches cylinder
  • (4) : Ø 10 mm / 0.394 inches stainless steel cylinder
  • (5) : Ø 25 mm / 0.984 inches stainless steel cylinder

Expand all

Related products & accessoires

img
XXZB130

Mounting accessory for OsiSense XX M30

img
XZCPV1164L2

Pre wired connectors XZ, straight female, M12, 5 pins, cable PVC 2 m

img
XZCPV11V12L2

Pre wired connectors XZ, straight female, M12, 5 pins, cable PVC 2 m

Back to top

arrow