XX230A10HA00M12
ultrasonic sensor cylindrical M30 - Sn=1m - pump out NO PNP sync - M12
END OF COMMERCIALISATION
XX230A10HA00M12 is replaced by the following product:
Quantity : 1
Expand all
Datasheet
Range of product
Telemecanique Ultrasonic sensors XX
Sensor type
Ultrasonic sensor
Series name
Application
Sensor name
XX2
Sensor design
Cylindrical M30
Detection system
Diffuse
Material
Plastic
Type of output signal
Discrete
Discrete output function
1 NC + 1 NO
Wiring technique
5-wire
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Discrete output type
PNP
Electrical connection
Male connector M12 5 pins
Product specific application
For 2 emptying levels monitoring
Enclosure material
ULTEM
Front material
Silicone
Thread type
M30 x 1.5
Function available
With synchronisation mode
Voltage drop
1 VOLT
Minimum size of detected object
Cylinder diameter 1.6 mm at 0.635 m
Delay first up
1000 MILLISECOND
Current consumption
100 mA
Status LED
Output state: 1 LED (green/red (flashing)), setting-up assistance: 1 LED (green/red (flashing)), distance indication: 1 LED (yellow)
Delay response
150 MILLISECOND
Delay recovery
1000 MILLISECOND
IP degree of protection
IP67 conforming to IEC 60529
Marking
CE
Standards
IEC 60947-5-2
Product certifications
CCSAus
UL
UL
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 (f = 10-55 Hz)
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
4.2 CENTIMETER
Package 1 width
13 CENTIMETER
Package 1 length
9.5 CENTIMETER
Package 1 weight
126 GRAM
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Expand all
Technical Drawings
Dimensions
Minimum Mounting Distances
Side by side
- e : respect the distances indicated on the detection curves
Minimum Mounting Distances
Face to face
- e : respect the distances indicated on the detection curves
- e > 4 x Sn
Wiring Diagram
Connector
- (1) (+) Brown
- (2) NO output (White)
- (3) (-) Blue
- (4) NO output (Black)
- (5) Synchronisation (Grey)
Wiring Diagram
NO + NO Outputs, PNP
- (1) (+) Brown
- (2) NO output (White)
- (3) (-) Blue
- (4) NO output (Black)
- (5) Synchronisation (Grey)
- BN Brown
- WH White
- BU Blue
- BK Black
- GY Grey
- (1) Open = burst
- Close = no burst
Curves
- (1) Parallel movement
- (2) Distance
- (3) Blind zone for diffuse sensors.
Operating Curves
- (1) Adjustable detection zone
- (2) Output activated
- (3) Output deactivated
- (4) NO output
Expand all
Related products & accessories
Back to top
