XX9V3A1F1M12
Ultrasonic sensors XX, ultrasonic sensor cylindrical M30, Sn 1 m, 0...10 V, M12 connector
Discontinued End of commercialization date : 25 May 2023 End of service date : 25 May 2023
XX9V3A1F1M12 is replaced by the following product:
XXS30P1VM12
Ultrasonic sensors XX, ultrasonic sensor, plastic, cylindrical M30, straight, 1 m, 0...10 V
Commercialised
Quantity : 1
Expand all
Datasheet
Range of product
Telemecanique Ultrasonic sensors XX
Sensor type
Ultrasonic sensor
Series name
General purpose
Sensor name
XX9
Sensor design
Cylindrical M30
Detection system
Diffuse
[Sn] nominal sensing distance
1 m adjustable with remote teach push-button
Material
Plastic
Type of output signal
Analogue
Wiring technique
4-wire
Analogue output function
0...10 V
[Us] rated supply voltage
15...24 V DC with reverse polarity protection
Electrical connection
Male connector M12 4 pins
[Sd] sensing range
0.1…1 m
Beam angle
7 °
IP degree of protection
IP67 conforming to IEC 60529
Enclosure material
Valox
Front material
Epoxy
Thread type
M30 x 1.5
Supply voltage limits
10…28 V DC
[Sa] assured operating distance
0.1…1 m (teach mode)
Blind zone
0…100 mm
Transmission frequency
180 kHz
Repeat accuracy
0.9 %
Deviation angle from 90° of object to be detected
-5…5 °
Minimum size of detected object
Cylinder diameter 50.8 mm at 1 m
Status LED
Setting-up assistance: 1 LED (dual colour)
Supply on: 1 LED (green)
Output state: 1 LED (yellow)
Supply on: 1 LED (green)
Output state: 1 LED (yellow)
Current consumption
60 mA
Maximum switching capacity
2 kOhm overload and short-circuit protection
Setting-up
Slope selection using teach button
Maximum delay first up
1200 ms
Maximum delay response
250 ms
Maximum delay recovery
250 ms
Marking
CE
Threaded length
37 mm
Height
96 mm
Width
30 mm
Net weight
0.09 kg
Standards
IEC 60947-5-2
Product certifications
cCSAus
UL
UL
Ambient air temperature for operation
0…70 °C
Ambient air temperature for storage
-40…80 °C
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 (f = 10…55 Hz)
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Resistance to electrostatic discharge
8 kV level 4 conforming to IEC 61000-4-2
Resistance to electromagnetic fields
10 V/m level 3 conforming to IEC 61000-4-3
Resistance to fast transients
1 kV level 3 conforming to IEC 61000-4-4
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
3.0 cm
Package 1 Width
9.525 cm
Package 1 Length
3.0 cm
Package 1 Weight
226.796 g
Unit Type of Package 2
S03
Number of Units in Package 2
15
Package 2 Height
30.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
3.902 kg
Sustainable offer status
Green Premium product
EU RoHS Directive
Mercury free
Yes
RoHS exemption information
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Technical Drawings
Dimensions
Minimum Mounting Distances
Side by side
- e : respect the distances indicated on the detection curves
Minimum Mounting Distances
Face to face
- e : respect the distances indicated on the detection curves
- e > 4 x Sn
Wiring Diagram
4-Wire Type
- (1) (+)
- (2) Return signal or teach
- (3) (-)
- (4) Output signal
4-Wire Type
- (1) (+)
- (2) Return signal or teach
- (3) (-)
- (4) Output signal
- BN Brown
- WH White
- BU Blue
- BK Black
Curves
- (1) Parallel movement
- (2) Distance
- (3) Blind zone for diffuse sensors.
Expand all
Documents & Downloads
Document name
Date
Size
Document name
Date
Size
11/23/2023
17.9 MB
11/23/2023
18.1 MB
11/23/2023
17.9 MB
11/23/2023
18.0 MB
Document name
Date
Size
4/29/2024
195.3 kB
Document name
Date
Size
Expand all
Related products & accessoires
XSZB130
Inductive proximity sensors XS, accessory for sensor, Ø 30 mm, fixing clamp with indexing, plastic
XUZ2001
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, M12 rod
XUZ2003
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, support for M12 rod
XUZB2030
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, bracket with ball joint, Ø 30 mm
XXZ30
Accessory for XX6, 90° fixing bracket, metallic
XZCC12FCM40B
Female, M12, 4 pin, elbowed connector, cable gland Pg 7
XZCC12FCP40B
Female, M12, 4 pin, elbowed connector, cable gland Pg 7
XZCC12FDM40B
Female, M12, 4 pin, straight connector, cable gland Pg 7
XZCC12FDP40B
Female, M12, 4 pin, straight connector, cable gland Pg 7
XZCP1141L2
Pre wired connectors XZ, straight female, M12, 4 pins, cable PUR 2 m
XZCP1241L2
Pre wired connectors XZ, elbowed female, M12, 4 pins, cable PUR 2 m
Back to top
