XS4P30MA230C
Inductive sensor XS4 M30 - L74mm - PPS - Sn15mm - 24..240VAC/DC - DIN43650A
End of commercialisation Date d'arrêt de fabrication : Fin de prestation de service :
XS4P30MA230C is replaced by the following product:
XS4P30MA230L01C
Inductive proximity sensors XS, inductive sensor XS4 M30, L62mm, PPS, Sn15mm, 24...240VAC/DC, DIN 0.15 m
Quantity : 1
Déplier tout
Fiche technique
Range of product
Telemecanique Inductive proximity sensors XS
Series name
General purpose
Sensor type
Inductive proximity sensor
Sensor name
XS4
Sensor design
Cylindrical M30
Size
74 mm
Body type
Fixed
Detector flush mounting acceptance
Non flush mountable
Material
Plastic
Type of output signal
Discrete
Wiring technique
2-wire
Output circuit type
AC/DC
Discrete output function
1 NO
Electrical connection
Male connector DIN 43650A, 4 pins
[Us] rated supply voltage
24...240 V AC/DC 50/60 Hz
Switching capacity in mA
5...200 mA DC, 5...300 mA AC
IP degree of protection
IP67 conforming to IEC 60529
Enclosure material
PPS
Thread type
M30 x 1.5
Detection face
Frontal
Front material
PPS
Sensing range
8...15 mm
Differential travel
1...15 % of Sr
Status LED
Output state: 1 LED (yellow)
Residual current
0.6 mA open state
Switching frequency
<= 1000 Hz DC, <= 25 Hz AC
Voltage drop
<5.5 V (closed)
Delay first up
40 MILLISECOND
Delay response
0.2 MILLISECOND
Delay recovery
0.4 MILLISECOND
Marking
CE
Product certifications
CCC
CSA
UL
CSA
UL
Vibration resistance
25 gn amplitude = +/- 2 mm (f = 10-55 Hz) conforming to IEC 60068-2-6
Shock resistance
50 gn for 11 ms conforming to IEC 60068-2-27
Unit type of package 1
PCE
Number of units in package 1
1
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. Fo more information go to www.P65Warnings.ca.gov
Back to top
